The mode toggle switch is used to switch between momentary correction, continuous correction, and accessories. Momentary correction"M" is a short stimulation no matter how long you hold down the training key. While continuous correction "C" is a long burst of stimulation that will last as long as you hold down the training button. The accessories button "A" is what you will use to activate and deactivate lights on the unit.
The LED lights on the PT10 are used to enhance visibility at night.
The prongs are used to send stimulation to the dogs neck when you correct them. The system will come with two sets of prongs a short set for short hair dogs and long prongs for long hair dogs.
The LED lights on the PT10's are used to increase visibility at night.
This is used to adjust the lenth of you collar strap around your dogs neck.
The indicator light is used to show the status of the collar. This is where you can easily check to see if your collar is turned on and working properly.
The upper training key is used as one of the two keys to correct your dog. Using the top key by itself will give you a medium level of stimulation while selecting both the top and bottom training keys will give you a high level of stimulation. You can also use the top key to turn your collar lights on as well as vibrate your dog collar when the proper setting are on.
The tone key is used if you would like to give a warning to a dog before correcting. The tone is a loud beep that will come out of the collar which will help get the dogs attention.
The dog device toggle switch is used to switch the Handheld between dog devices. The handheld can hold up to three dogs at one time but you are only able to train one at a time. With the easy flip of this switch you will be able to move between all 3 of your dogs.
The lower training key is used as one of the two keys to correct your dog. Using the bottom key by itself will give you a low level of stimulation while selecting both the top and bottom training keys will give you a high level of stimulation. You can also use the bottom key to turn your collar lights off as well as vibrate your dog collar when the proper setting are on.
The battery level indicator is used to show the battery life that is left on your handheld. If the indicator light is showing green it has a good charge, if it is yellow the device needs to be charged soon, if the indicator is red the battery is very low and needs to be immediately charged, and if it is blinking red the device is dead and will not operate.
The intensity level indicator is used to select the level of intensity you would like to correct your dog at. To select your level on intensity line the intensity of your choice up with the indicator light. This is also where you will find the option to use vibration or to turn on your accessories.
The intensity level indicator is used to select the level of intensity you would like to correct your dog at. To select your level on intensity line the intensity of your choice up with the indicator light. This is also where you will find the option to use vibration or to turn on your accessories.
The antenna is used to send signals back in forth from your handheld and dog device.
Plug your device in using the charging port below to recharge your lithium-ion battery.
The power button is used to turn on your device. You can check to make sure the collar has turned on by checking the indicator light.
The mode toggle switch is used to switch between momentary correction, continuous correction, and accessories. Momentary correction"M" is a short stimulation no matter how long you hold down the training key. While continuous correction "C" is a long burst of stimulation that will last as long as you hold down the training button. The accessories button "A" is what you will use to activate and deactivate lights on the unit.
The LED lights on the PT10 are used to enhance visibility at night.
The prongs are used to send stimulation to the dogs neck when you correct them. The system will come with two sets of prongs a short set for short hair dogs and long prongs for long hair dogs.
The LED lights on the PT10's are used to increase visibility at night.
This is used to adjust the lenth of you collar strap around your dogs neck.
The indicator light is used to show the status of the collar. This is where you can easily check to see if your collar is turned on and working properly.
The upper training key is used as one of the two keys to correct your dog. Using the top key by itself will give you a medium level of stimulation while selecting both the top and bottom training keys will give you a high level of stimulation. You can also use the top key to turn your collar lights on as well as vibrate your dog collar when the proper setting are on.
The tone key is used if you would like to give a warning to a dog before correcting. The tone is a loud beep that will come out of the collar which will help get the dogs attention.
The dog device toggle switch is used to switch the Handheld between dog devices. The handheld can hold up to three dogs at one time but you are only able to train one at a time. With the easy flip of this switch you will be able to move between all 3 of your dogs.
The lower training key is used as one of the two keys to correct your dog. Using the bottom key by itself will give you a low level of stimulation while selecting both the top and bottom training keys will give you a high level of stimulation. You can also use the bottom key to turn your collar lights off as well as vibrate your dog collar when the proper setting are on.
The battery level indicator is used to show the battery life that is left on your handheld. If the indicator light is showing green it has a good charge, if it is yellow the device needs to be charged soon, if the indicator is red the battery is very low and needs to be immediately charged, and if it is blinking red the device is dead and will not operate.
The intensity level indicator is used to select the level of intensity you would like to correct your dog at. To select your level on intensity line the intensity of your choice up with the indicator light. This is also where you will find the option to use vibration or to turn on your accessories.
The intensity level indicator is used to select the level of intensity you would like to correct your dog at. To select your level on intensity line the intensity of your choice up with the indicator light. This is also where you will find the option to use vibration or to turn on your accessories.
The antenna is used to send signals back in forth from your handheld and dog device.
Plug your device in using the charging port below to recharge your lithium-ion battery.
The power button is used to turn on your device. You can check to make sure the collar has turned on by checking the indicator light.
- Outdoor Dog Supply -
We warranty what we sell! See warranty page for details.
We use our products, we can troubleshoot any problems
We will ship your order in 24-48 hours or less!
!